Zip AP3/05 Aquapoint III 5 Ltr, Undersink unvented hot water 2.2 Kw
Suitable as single or multiple outlet water heater.
Zip Aquapoint unvented unvented Water Heater, can serve single or multiple hot water outlets. It has a glass lined steel storage tank tested to 12 bar and a sacrificial anode is fitted for protection against aggressive water conditions.
All Zip Aquapoint III water heaters come with all the necessary accessories and factory fitted P&T valve.
Zip Aquapoint III Water Heaters are a favourite choice of supplying hot water within a domestic or commercial environment.
Capacity: 5 Ltrs
Rating: 2.2 Kw
Dimensions: H 376 x W 256 x D 260
Weight (kg) Empty 8.5 Full 18.5
Plumbing: Water connection 15mm BSP
Minimum recommended water pressure 1 bar
Water Tank: Hot water storage tank of 1.8mm thick glass enamelled steel tested to 12 bar
Case: High impact and corrosion resistant white plastic
Insulation: High Density CFC-free polyurethane foam insulation
Taps: No special taps required.
Safety features: Resettable over temperature safety cut out.
* Manually resettable thermal cutout set to 85 oC
+/ -3 oC
* expansion relief valve (supplied) set at 6 bar.
* protected against frost whilst power is on.
* sacrificial anode for added protection against corrosion for element and tank must be checked regularly (6 months) and replaced where necessary as gradual erosion will occur.
In extreme cases local water conditions can cause rapid erosion of the anode resulting in particles being deposited as a residue.
Pressure and temperature relief valve, where fitted requires plumbing to waste in accordance with water byelaws.
Electrical: To be wired to a double pole fused spur, minimum break rating of 13 amp.
Minimum length of pipe (from water heater to nearest draw off tap)
For a 10 Ltr Unit using 15mm pipe work: 2.7 metres (9 ft)
22 mm pipe work: 1.2 metres (4 ft)
If you do not have this minimum length of pipe work then you will need to fit Pack AQ2.
The Aquapoint should not be used where water quality is critical.
Approvals: WRAS approved and CE endorsed.
Warranty:
Standard 12 months on-site parts and labour warranty. For further information on Zip's warranty:
Download Zip's warranty information
All prices are subject to V.A.T.
