Zip HT1738UK BH240G4 240 Boiling COMMERCIAL 3 In 1
Boiling | Filtered | Instantly | + Hot/Cold
Buy a Boiling filtered water plus hot and cold water.
Separate boiling water tap and hot/cold mixer.
Zip 3-in-1 system - Hot/Cold plus 240 cups of boiling filtered water per hour with free-flow.
Reduce staff ‘downtime’ waiting for old kettles to boil.
With new Zip G4 power-saving technology and Zip 0.2 micron filtration.
Boiling filtered water instantly, plus hot &cold. Separate taps for boiling water and hot/cold.
No separate hot water supply needed. This vented system mixes boiling water with cold water for its hot water supply.
Adjustable water temperature: boiling water 100°C to 68°C. Power-Pulse™ electronic technology controls the set boiling water temperature within 0.2°C.
Choice of fingertip control for fast cup filling (lever down) or hands-free pot filling (lever up).
Two safety modes. Can be set to require finger-thumb operation for boiling water access, eliminating the risk of accidental use. Can also be set to place boiling water in “isolation mode” for added safety.
Low-energy lights signal when boiling water is ready, or filter change is due.
Hidden light sensor sends appliance to sleep to conserve energy whenever the room goes dark.
Sleeps at 64°C or powers OFF after 2 hours of non-use.
Plus inbuilt 24/7 on/off timing allowing power to be turned off for weekday or weekend periods.
Zip 0.2 micron filter puts crystal-clear, better-tasting water on tap, filtering out chlorine taste and odour, lead, and impurities as tiny as one five-thousandth of a millimetre, including protozoan cysts such as Cryptosporidium but does not remove beneficial fluoride.
New under-sink Zip Command Centre™ leads the world in time-saving and energy-saving technology, reducing standby energy consumption substantially over earlier models of similar capacity.
Typical Specification
“Under-sink boiling filtered water appliance equipped with boiling water tap and separate hot/cold mixer plus integral 5 bar pressure limiting and dual check valve, 0.2 micron water filter, an interactive touch screen display with password protection and two boiling-water safety modes.”
Alternative: installed away from sink on a ZT008 ‘font’.
Zip HydroTap Commercial 3-In-1 models with new Zip G4 power-saving technology.
Model Rating (kW) @ 230 V
BH240G4
Dimensions W x D x H (mm)
280 x 313 x 335
Standard Cup = 167 ml. (a) Order codes shown here are for boiling water tap installed on a sink. To install boiling tap on a ‘font’ also specify a font kit: order code ZT008. (b) Model BH240G4 is installed with an externally mounted 2.2 kW booster unit and must be connected to two separate 13 amp fused spurs.
Boiling System
Open outlet, vented system, factory set to operate at 98°C.
Flow rate 4.0 l/min.
HydroTap is the most economical way to deliver instant boiling water for your staff, clients and guests
Features
Zip Hydrotap 3-in-1 offer all of the advantages of a standard HydroTap plus these five outstanding benefits.
Simplifies the provision of hot water in office kitchens-hot & cold via the mixer tap and boiling only from the Hydrotap all from a single source.
Cuts costs eliminates the need for a separate hot water supply or the expense of hot water circulation from a central source.
Saves space no need to provide cupboard space for a separate hot water heater.
Conserves energy dramatically cuts heat loss from hot water storage.
The mixer tap will deliver up to 3 ltr/min, which is ideal for rinsing cups and hand-washing where a dishwasher is the primary source of washing dishes. The 3-in-1 is not intended for high use applications such as filling sinks or cleaners buckets.
Integral 24 hour 7 day timer enables the boiling and chilled water units to switch off automatically during known periods of inactivity e.g. overnight or weekends, but return to full functionality ahead of the next expected demand.
Inactivity Sleep Mode enables the boiling water unit to power down or switch off after 2 hours non-use. Powering down allows the water temperature to gradually reduce to 65 oC, at which it is maintained. Upon further draw off.
Warranty:
Zip HydroTap G4 models shown here are covered by a comprehensive full parts and labour warranty for 24 months from date of purchase. A further 36 months boiling tank warranty is included, provided any service required is carried out by a Zip-trained service provider and that water filter cartridge replacements are made at recommended intervals.
No warranty applied to filtration cartridges installed with the appliance as cartridge life varies according to water quality and usage.
Download Zip's warranty information
Filtration:
In areas where hard water is an issue, it is strongly recommended that a special limescale filter is fitted. In these circumstances the filter must be changed within the specified period.
Approvals: Wras and CE endorsed
Ventilation:
It is essential that the cupboard containing the under-counter unit is adequately ventilated as poor air circulation will adversely affect the performance of the system. Please refer to information and diagram below.
Download Zip's commercial brochure
Prices subject to V.A.T.
